rameshvaid
09-02 03:02 PM
Hi there,
I have been arrested for shoplifting. Finger printed,and produced in court. The case has been dismissed as I did not do it on purpose. I got the document from the court that case is DISMISSED. 1. Is it good to do the "Case Expungement"?
2. Does the port of entry officer sees the arrest even I expunge the case?
3. any other scenarios I might encounter?
Any suggestions are highly appreciated
Thank you
At the POE the IO will surely know abt your arrest. Have all your documents from the court and show it to them and you will be allowed to come in.
Expungement can be done only after 12 months and u should not have any other record against you.
Just relax,, do not repeat the mistake and cross the boarder if you have to peacefully.. You will be just fine..
RV
I have been arrested for shoplifting. Finger printed,and produced in court. The case has been dismissed as I did not do it on purpose. I got the document from the court that case is DISMISSED. 1. Is it good to do the "Case Expungement"?
2. Does the port of entry officer sees the arrest even I expunge the case?
3. any other scenarios I might encounter?
Any suggestions are highly appreciated
Thank you
At the POE the IO will surely know abt your arrest. Have all your documents from the court and show it to them and you will be allowed to come in.
Expungement can be done only after 12 months and u should not have any other record against you.
Just relax,, do not repeat the mistake and cross the boarder if you have to peacefully.. You will be just fine..
RV
wallpaper point blank indonesia. pangkat
kshitijnt
02-10 07:46 PM
Forget about it. USCIS will waste 3699 more visas this year on and show anti immigrants that they have done something for them.
Lok_sumi
07-24 02:57 PM
You can file 2 applications. It's likely that they will not issue two Advance Parole and EAD applications to each of you. At some point down the road USCIS will make you choose which application to pursue to completion.
2011 point blank wallpaper. pangkat
softa
June 1st, 2006, 04:56 PM
Thanks, your reply really helped me understand a few things. First of all, for the money I can spend there isn't much of a choice (meaning what I already picked is fine for the money spent), then, even more important fact I realized is that the equipment I can afford for now, can be a starting point in my photography experience. It is more important that I use it, take photos and practice than to own expensive gear and never really use it. In the end I hope that one day in the future when I gain the needed skill I'll be able to afford a better and a more advanced equipment. So, once again, thanks a lot.
more...
solaris27
05-18 08:35 AM
I did it myself.
Don't waste money for any lawyers .
its very simple .
Don't waste money for any lawyers .
its very simple .
emmar
02-05 02:19 AM
Hi,
I think you have some really cute flash things on your websites. And how did you do that cool transparent ball with a gradient shadow on it, on the red background?
And your price seems really good too.
Maybe you would be interested in visiting another forum too, at www.wahm.com. You might be able to get some customers there because most people there have websites and don't know or have Flash.
I also find that they give good marketing advice. I don't know if you need it, but I do, so I really appreciate it.
I think you have some really cute flash things on your websites. And how did you do that cool transparent ball with a gradient shadow on it, on the red background?
And your price seems really good too.
Maybe you would be interested in visiting another forum too, at www.wahm.com. You might be able to get some customers there because most people there have websites and don't know or have Flash.
I also find that they give good marketing advice. I don't know if you need it, but I do, so I really appreciate it.
more...
Aah_GC
04-15 12:20 PM
Many Congratulations!
2010 wallpaper point blank. pangkat
pd052009
01-03 10:41 AM
As this bill hurts big corporations, the govt may try something like this. But I sincerely doubt "Indian" Govt will seriously do something for this.
more...
no-tec
10-14 07:28 PM
i think its like that for everyone. theres always 100
s of ppl on at once. :(
s of ppl on at once. :(
hair wallpaper point blank terbaru.
retrohatao
07-17 02:41 PM
Am I hysteric or what?
Any ways here is the flash.
My case has been approved and got the so called Magic e-mails stating that the cards have been order
for me and the spouse.
Here is the "series of unfortunate events" :
1.
EB3/TSC
PD: Sometime in 1998
Stuck at labor for three years. Finally cleared in 2000 a month after I was let go.
2. Joined different company in 2001. Encore!!!. Filed GC again in 2001. This time I chose EB2
thought I would save some time.
3. Thanks to the political gimmics, stuck at labor again for three years finally cleared in 2004
4. Elated with the good news, applied i-140 & I-485 in 2004.
5. I-140 cleared without any hitches got EAD too. Expected i-485 to clear with in reasonable
amount of time.
6. Wait!!!, there it goes... the dreaded namecheck stopped it for another two years.
Following is the chronological order:
EB2/TSC
PD : October 17, 2001
LCl : January 7, 2004
RD I140/485 : May 28, 2004
EAD : July 26, 2004
FP Notice Date : February 1, 2005
FP Done : March 22, 2005
I140l : February 11, 2005
Namecheck initiated: June 2004
Namecheck cleared: June 2006.
I-485 cleared and cards ordered: July 2006.
Here is what I did to get out of namecheck:
1. e-mail to FBI on monthly basis
2. Snail mail to FBI, OMBUDSMAN on monthly basis
3. FAX to FBI on monthly basis
3. Involved congressman. Congressman's office contacted USCIS, but did not want to get involved with
FBI directly
4. Involved Senators. Senator's office contacted USCIS, but did not want to get involved with
FBI directly. One senator never even responded
5 got FOPIA.
6. Made the attorney to contact USCIS officially
7. Started the group "namechektracker" on yahoo groups http://groups.yahoo.com/group/namechecktracker/ (http://groups.yahoo.com/group/namechecktracker/)
and almost filed WOM. Only thing left is to send the papers.
8. Tried some contacts with USCIS despite the "NO" from the attorney and the employer.
Just tried some personal mails to USCIS director FBI et all.
Not sure what really worked. Some one from DOJ took time to call me and informed that my
name check got cleared.
moral: Keep your eyes/ears open. DO NOT JUST BELIEVE the words of your attorney.
try the above steps and hope for the best.
Thanks to the forum members!!! I learnt lot from your experience.
I will still be around on this forum and will try to help as much as I can
Any ways here is the flash.
My case has been approved and got the so called Magic e-mails stating that the cards have been order
for me and the spouse.
Here is the "series of unfortunate events" :
1.
EB3/TSC
PD: Sometime in 1998
Stuck at labor for three years. Finally cleared in 2000 a month after I was let go.
2. Joined different company in 2001. Encore!!!. Filed GC again in 2001. This time I chose EB2
thought I would save some time.
3. Thanks to the political gimmics, stuck at labor again for three years finally cleared in 2004
4. Elated with the good news, applied i-140 & I-485 in 2004.
5. I-140 cleared without any hitches got EAD too. Expected i-485 to clear with in reasonable
amount of time.
6. Wait!!!, there it goes... the dreaded namecheck stopped it for another two years.
Following is the chronological order:
EB2/TSC
PD : October 17, 2001
LCl : January 7, 2004
RD I140/485 : May 28, 2004
EAD : July 26, 2004
FP Notice Date : February 1, 2005
FP Done : March 22, 2005
I140l : February 11, 2005
Namecheck initiated: June 2004
Namecheck cleared: June 2006.
I-485 cleared and cards ordered: July 2006.
Here is what I did to get out of namecheck:
1. e-mail to FBI on monthly basis
2. Snail mail to FBI, OMBUDSMAN on monthly basis
3. FAX to FBI on monthly basis
3. Involved congressman. Congressman's office contacted USCIS, but did not want to get involved with
FBI directly
4. Involved Senators. Senator's office contacted USCIS, but did not want to get involved with
FBI directly. One senator never even responded
5 got FOPIA.
6. Made the attorney to contact USCIS officially
7. Started the group "namechektracker" on yahoo groups http://groups.yahoo.com/group/namechecktracker/ (http://groups.yahoo.com/group/namechecktracker/)
and almost filed WOM. Only thing left is to send the papers.
8. Tried some contacts with USCIS despite the "NO" from the attorney and the employer.
Just tried some personal mails to USCIS director FBI et all.
Not sure what really worked. Some one from DOJ took time to call me and informed that my
name check got cleared.
moral: Keep your eyes/ears open. DO NOT JUST BELIEVE the words of your attorney.
try the above steps and hope for the best.
Thanks to the forum members!!! I learnt lot from your experience.
I will still be around on this forum and will try to help as much as I can
more...
chanduv23
09-10 06:47 AM
Post mortem would reveal a lot of information - but I doubt if the officials would ever do that - the very fact that they reversed the bulletin fearing investigation and media publicity is that something "not very good" has been happening and they covering it up by saying backlogs, retrogression, process must be improved, etc...
hot point blank wallpaper
gc_kosam
06-02 02:09 PM
Guru's,
My employer filed my I 485 last year during July visa bulletin under EB3. My I 140 is already approved from the same employer. Now my employer is planning to apply for EB2 labor. My question is
1) Once my EB2 labor gets approved, Do they have to file new I 140 again (OR) can they use the approved I 140 (EB3) to port my PD to EB2 application
2) If they apply for new EB2 140...does this invalidate my approved EB3 140 ???:confused:
3) If they have to file I 140 again for EB2...is this I 140 goes through the regular time frames (12months) (OR) since my EB3 140 is already approved my EB2 140 gets approved faster.
Please Guru's share your thoughts.
Thanks in Advance
My employer filed my I 485 last year during July visa bulletin under EB3. My I 140 is already approved from the same employer. Now my employer is planning to apply for EB2 labor. My question is
1) Once my EB2 labor gets approved, Do they have to file new I 140 again (OR) can they use the approved I 140 (EB3) to port my PD to EB2 application
2) If they apply for new EB2 140...does this invalidate my approved EB3 140 ???:confused:
3) If they have to file I 140 again for EB2...is this I 140 goes through the regular time frames (12months) (OR) since my EB3 140 is already approved my EB2 140 gets approved faster.
Please Guru's share your thoughts.
Thanks in Advance
more...
house download wallpaper point blank
calboy78
08-18 10:45 PM
Sorry to hear about this.
This is so ridiculous - I have had friends who had degree in metallurgy and they successfully got their h1 and even green card :mad:
This is so ridiculous - I have had friends who had degree in metallurgy and they successfully got their h1 and even green card :mad:
tattoo pictures mayor point blank.
ramaonline
03-17 01:43 PM
You can submit the claim yourself - Download the claim forms from your insurance co website. Use these HIPAA codes -
Do a google search for any other codes you need to include.
Testing / Lab HIV-1 and HIV-2 86703
Testing / Lab Syphilis test (RPR) 86592
Preventive Care PPD (tuberculosis) intra-dermal skin test 85680
Preventive Care MMR immunization (subcutaneous) 90707
Preventive Care Varicella immunization 90716
Preventive Care TD immunization (Tetanus) 90718
Do a google search for any other codes you need to include.
Testing / Lab HIV-1 and HIV-2 86703
Testing / Lab Syphilis test (RPR) 86592
Preventive Care PPD (tuberculosis) intra-dermal skin test 85680
Preventive Care MMR immunization (subcutaneous) 90707
Preventive Care Varicella immunization 90716
Preventive Care TD immunization (Tetanus) 90718
more...
pictures PB wallpaper - Point blank;
vallabhu
12-20 11:13 AM
Does she have valid visa stamped on passport for the day she is landing in US?
dresses point blank online indonesia.
cheg
07-13 04:24 AM
this forum is amazing. people are helping each other and trying to make things seem a bit brighter. good luck to everyone!:)
more...
makeup download wallpaper point
krustycat
10-30 10:00 AM
No activity at all
girlfriend wallpaper point blank lucu.
pappu
07-01 11:25 PM
You need not worry about maintaining your H1B status in order to file for 485. Your 140 is already approved so when your date arrives to file for 485 you can file for it from Canada. You can come and work again based on your 485. You may go for councellor processing for your GC and get it outside the country. Councellor processing might even be faster than waiting inside US at 485 stage for long times until one finally get actual GC in hand.
I commend your planning and applying for Canadian PR in time as plan B.
I commend your planning and applying for Canadian PR in time as plan B.
hairstyles Point Blank - Movie Reviews,
Canadian_Dream
09-25 12:41 PM
A real life example of libel lawsuit:
http://www.eweek.com/article2/0,1895,1905068,00.asp
http://www.lightreading.com/document.asp?doc_id=85996
http://www.eweek.com/article2/0,1895,1905068,00.asp
http://www.lightreading.com/document.asp?doc_id=85996
mbartosik
04-10 09:32 PM
I posted a few days ago here
http://immigrationvoice.org/forum/showthread.php?t=544
For those people on 1 year extensions (or near end of 6 years) they cannot refile without perfect timing because otherwise the labor would be cancelled when filing, and thus PERM would not be outstanding for greater than 12 months.
Also if your job has been in DoL and BEC for 4 years and is in the technoology business then it is likely that the description has changed enough to make an identical filing untrue, just because technology changes and thus skills requirements do, and thus PD is not kept because the job is not identical. Also DoL has not defined "how equal" the application must be to qualify to keep the PD.
Thus we need a law to allow keeping the PD even if the job description has changed.
Also it would be good to allow people to file PERM without withdrawing their Labor app. However, this might flood PERM, because too many people might do that.
My current estimate is that BEC will process my application within about 12 months, if their 18 month estimate is right. But it would take 6 months of recruitment effort plus overhead to do PERM -- maybe or 9 months total, and then two months waiting for PERM -- total 11 months. Saving 1 month. But the PERM queue could grow too.
If I trust BECs on their estimate it is not worth the hassel of PERM, but should I trust someone who's estimates have been wrong two or three times before?
What is also needed is an "insurance policy" if BECs do not deliver on their promise of only 18 more months, but it would be hard to get law made on this. For example, after 18 month deadline, the assumption could be that all remaining applications are valid and allowed to proceed UNLESS BEC later demonstrates a fraudulant application. Otherwise people are always in the situation of DoL saying "just another X months". This would also allow BECs after 18 months to change mode into just looking for fraud which should be easier to do than qualifying the case.
There is also an issue of employers not wanting to file PERM, because they know that they have an endentured / captive employee and the BECs are doing their dirty work. So it is important to break this chain.
So in summary law changes:
1) Allow PD to be kept even if employer withdrawns labor, changes description, or refiles with PERM. After some date any labor application unprocessed by BEC would give the immigrant a guarenteed priority date.
2) Consider allowing concurrent PERM filing.
3) If DoL does not meet its own target (which is well behind congress's target), then all outstanding applications are assumed valid and allowed to proceed as if certified, unless the application is later shown to be frivolent or clearly fraudulant. Leaving BECs to just "skim check" for fraud and stupid applications after 18 months.
http://immigrationvoice.org/forum/showthread.php?t=544
For those people on 1 year extensions (or near end of 6 years) they cannot refile without perfect timing because otherwise the labor would be cancelled when filing, and thus PERM would not be outstanding for greater than 12 months.
Also if your job has been in DoL and BEC for 4 years and is in the technoology business then it is likely that the description has changed enough to make an identical filing untrue, just because technology changes and thus skills requirements do, and thus PD is not kept because the job is not identical. Also DoL has not defined "how equal" the application must be to qualify to keep the PD.
Thus we need a law to allow keeping the PD even if the job description has changed.
Also it would be good to allow people to file PERM without withdrawing their Labor app. However, this might flood PERM, because too many people might do that.
My current estimate is that BEC will process my application within about 12 months, if their 18 month estimate is right. But it would take 6 months of recruitment effort plus overhead to do PERM -- maybe or 9 months total, and then two months waiting for PERM -- total 11 months. Saving 1 month. But the PERM queue could grow too.
If I trust BECs on their estimate it is not worth the hassel of PERM, but should I trust someone who's estimates have been wrong two or three times before?
What is also needed is an "insurance policy" if BECs do not deliver on their promise of only 18 more months, but it would be hard to get law made on this. For example, after 18 month deadline, the assumption could be that all remaining applications are valid and allowed to proceed UNLESS BEC later demonstrates a fraudulant application. Otherwise people are always in the situation of DoL saying "just another X months". This would also allow BECs after 18 months to change mode into just looking for fraud which should be easier to do than qualifying the case.
There is also an issue of employers not wanting to file PERM, because they know that they have an endentured / captive employee and the BECs are doing their dirty work. So it is important to break this chain.
So in summary law changes:
1) Allow PD to be kept even if employer withdrawns labor, changes description, or refiles with PERM. After some date any labor application unprocessed by BEC would give the immigrant a guarenteed priority date.
2) Consider allowing concurrent PERM filing.
3) If DoL does not meet its own target (which is well behind congress's target), then all outstanding applications are assumed valid and allowed to proceed as if certified, unless the application is later shown to be frivolent or clearly fraudulant. Leaving BECs to just "skim check" for fraud and stupid applications after 18 months.
psychman
04-01 07:28 PM
Also, regarding this matter, how would I set this up if I wanted a rotate transform to happen to an Image object when a context menu item is clicked; not the image itself? I have been playing around with a setup in which I cast the sender as an Image and then using two If statements to check which context menu item was clicked. I will then apply either a clockwise or counter clockwise rotate transform based on which context menu item was clicked. The problem I am running into is how to write the condition for the If statement, undoubtedly due to my lack of C# experience. The following does not work because it says "click" can only be on the left of a += or -=. Here is the code:
//code from other private method
...myImage.MouseRightButtonUp += new MouseButtonEventHandler(myImage_MouseRightButtonUp );
void myImage_MouseRightButtonUp(object sender, MouseButtonEventArgs e)
{
Image clickedImage = (Image)sender;
if (contextRotateCW.Click == true)
{
//code to rotate "clickedImage" clockwise
}
if (contextRotateCCW.Click == true)
{
//code to rotate "clickedImage" counter clockwise
}
}
//code from other private method
...myImage.MouseRightButtonUp += new MouseButtonEventHandler(myImage_MouseRightButtonUp );
void myImage_MouseRightButtonUp(object sender, MouseButtonEventArgs e)
{
Image clickedImage = (Image)sender;
if (contextRotateCW.Click == true)
{
//code to rotate "clickedImage" clockwise
}
if (contextRotateCCW.Click == true)
{
//code to rotate "clickedImage" counter clockwise
}
}
No comments:
Post a Comment